198001669 - A005 ALARM LED NOT WORKING

When the alarm is activated, the control LED does not switch off.

		TEST RESULTS
1	CHECKS USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket and check the following, in order:- presence of faults in the CAN	Move on to Step 2	Presence of faults in the B-CAN	Restore the correct connections at the nodes involved.
2	ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Using the diagnostic equipment, carry out the active diagnosis for the activation of the LED.	End of diagnosis	The LED is not activated	Replace the LED