198001682 - B002 STARTER MOTOR NOT WORKING

Turning the key to AVV, the starter motor does not work.

		Test results
0	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the Examiner diagnostic equipment and check the battery charge level.	Move on to Step 2	Battery charge too low.	Recharge the battery
			Battery charge too low.	Replace the battery    Op. 5530B10 BATTERY - R+R
1	ELECTRICAL CIRCUIT CHECK	All OK	Problems encountered	Operation
	Check the continuity/insulation of the electrical connection between the starter motor and the battery.    See E5010 STARTING AND RECHARING	Move on to Step 2	Electrical connection broken or not insulated.	Restore the continuity/insulation of the electrical connection    See E5010 STARTING AND RECHARING
2	ELECTRICAL CIRCUIT CHECK	All OK	Problems encountered	Operation
	Check the continuity/insulation of the connection between the ignition key barrel and the starter motor.    See E5010 STARTING AND RECHARING	Move on to Step 3	Electrical connection broken or not insulated.	Move on to Step 4
	Check the condition of the starter motor and that it is working properly	Move on to Step 3	Fault in the starter motor	Overhaul the starter motor
			Fault in the starter motor that cannot be repaired	Replace the starter motor    Op. 5520B10 STARTER MOTOR - R+R
3	IGNITION KEY BARREL CHECK	All OK	Problems encountered	Operation
	Check the ignition key barrel is working correctly.	Move on to Step 7	Ignition key barrel damaged.	Replace the ignition key barrel    Op. 5520A10 IGNITION SWITCH ASSEMBLY - R+R
4	ELECTRICAL CIRCUIT CHECK	All OK	Problems encountered	Operation
	Check the continuity/insulation of the electrical connection between the ignition key barrel and the engine compartment control unit.    See E5010 STARTING AND RECHARING	Move on to Step 5	Electrical connection broken or not insulated.	Restore the continuity/insulation of the electrical connection    See E5010 STARTING AND RECHARING
5	ELECTRICAL CIRCUIT CHECK	All OK	Problems encountered	Operation
	Check the continuity/insulation of the electrical connection between the engine compartment control unit and starter motor.    See E5010 STARTING AND RECHARING	Move on to Step 6	Electrical connection broken or not insulated.	Restore the continuity/insulation of the electrical connection    See E5010 STARTING AND RECHARING
6	CORRECT OPERATION CHECK	All OK	Problems encountered	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Replace the engine compartment control unit    Op. 5505A13 ADDITIONAL JUNCTION UNIT IN ENGINE COMPARTMENT - R.R. Search for the fault starting from another symptom
7	CORRECT OPERATION CHECK	All OK	Problems encountered	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Replace the engine compartment control unit    Op. 5505A13 ADDITIONAL JUNCTION UNIT IN ENGINE COMPARTMENT - R.R. Search for the fault starting from another symptom