198001705 - D071 CRUISE CONTROL RECALL CONTROL NOT WORKING

After having deactivated the Cruise Control system by pressing the brake/clutch pedal, when the Cruise Control RESUME button is pressed the speed set previously is not restored

1	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic equipment to the engine management control unit.Check that the lever RECALL position is recognized.Check that the Cruise Control contacts are working properly in the RECALL position, carrying out    See Test 5580AC CRUISE CONTROL RECALL CONTROL CHECK	Move on to Step 2	No continuity for lever contacts	Replace the steering wheel interface lever with built-in Cruise Control    Op. 5580A10 CRUISE CONTROL LEVER ASSEMBLY - R+R
2		All OK	Problems encountered	Operation
	Check the electrical continuity of the wiring between the cruise control system control and the engine control unit    See E5050 DIESEL ENGINES ELECTRONIC MANAGEMENT	Move on to Step 3	Connections not correct	Restore the correct connections    See E5050 DIESEL ENGINES ELECTRONIC MANAGEMENT
3		All OK	Problems encountered	Operation
	Check that the fault is no longer present	End of diagnosis	The fault persists: engine management control unit defective	Replace the engine management control unit    Op. 1060G80 DIESEL ELECTRONIC INJECTION CONTROL UNIT - R.R