198001708 - D074 CRUISE CONTROL SYSTEM DOES NOT GO OFF WHEN BRAKE PEDAL PRESSED

1	BRAKE PEDAL SWITCH CHECK	All OK	Problems encountered	Operation
	Check that the brake pedal switch is working properly, carrying out	Move on to Step 2	Brake pedal switch connection faulty	Restore the correct connections    See E5050 DIESEL ENGINES ELECTRONIC MANAGEMENT
			Brake pedal switch faulty	Replace the brake pedal switch    Op. 1060G38 BRAKE PEDAL SWITCH - R.R
2	ENGINE MANAGEMENT CONTROL UNIT CONNECTIONS CHECK	All OK	Problems encountered	Operation
	With the ignition key in the ON position and the brake pedal pressed, check for a voltage signal at the engine management control unit coming from the brake switch    See E5050 DIESEL ENGINES ELECTRONIC MANAGEMENT	Move on to Step 3	No voltage detected	Repair the engine connections: wiring diagram    See E5050 DIESEL ENGINES ELECTRONIC MANAGEMENT
3		All OK	Problems encountered	Operation
	Check that the fault is no longer present by carrying out    See Test 5580AE CRUISE CONTROL OPERATION ROAD TEST CHECK	End of diagnosis	The fault persists: engine control unit defective	Replace the engine management control unit    Op. 1060G80 DIESEL ELECTRONIC INJECTION CONTROL UNIT - R.R