198001832 - K048 MIL WARNING LIGHT FLASHING

The engine fault warning light flashes with the engine started
The warning light can flash in two different ways: with the engine started up and the vehicle stationary or with the vehicle driving.
1FUEL RESERVE WARNING LIGHT CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fuel reserve warning light is offMove on to Step 2Fuel reserve warning light onTop up the fuel level so that it is not in the reserve zone and continue to Step 4
2FUEL LEVEL CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fuel level gauge is working properlyMove on to Step 3Fuel level gauge not workingProceed as instructed in the    See table K020 FUEL LEVEL GAUGE NOT WORKING
3CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION
Connect the diagnostic instrument (Examiner or Examiner Plus) and check the absence of the Misfiring errorEnd of diagnosisThe "misfire" error is presentProceed as instructed by the diagnostic tester
4ERROR CANCELLING AND CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Using the diagnostic equipment, cancel the errors in the control unit.Road test the vehicle and check that the errror does not occur againMove on to Step 5The "misfire" error is presentProceed as instructed by the diagnostic tester
5CORRECT OPERATION CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fault is no longer presentEnd of diagnosis