| | Test results |
| 0 | PRELIMINARY CHECKS | All OK | Problems encountered | Operation |
|---|
| Check whether the corresponding warning light in the instrument panel goes out when the passenger seat belt is fastened.Also check whether the warning light remains on if the seat belt is unfastened with a passenger sitting in the passenger seat and goes out when the belt is fastened | End of diagnosis | 1. The warning light does not go out under any circumstances2. The warning light does not go out without a passenger | See table K073 SEAT BELT UNFASTENED WARNING LIGHT ON 2. Move on to Step 1 |
| 1 | CONNECTIONS CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the seat connection is correctly inserted in the connection on the floor | Move on to Step 2 | Passenger presence sensor connector detached from the connection on the vehicle floor | Fit the seat connector correctly to the vehicle floor connector |
| 2 | WIRING INTERRUPTION CHECK | All OK | Problems encountered | Operation |
|---|
| Check for any breaks/tears in the wiring/device using the specific tester | End of diagnosis | Presence of cuts/tears in the connecting cables and interruption in the printed circuit | Replacement of the passenger presence sensor Op. 7065A34 PASSENGER PRESENCE SENSOR ON FRONT SEAT FOR INDICATING SEATBELT UNFASTENED R R |
