198001915 - P001 FRONT DOOR CLOSING DEFECTIVE

When the door lock is operated with the key or remote control or from the interior by means of the safety knob, one of the front doors does not close correctly.
If one door does not close correctly when the door lock is operated, the four doors may close and reopen after a few seconds.
TEST RESULTS
1CHECK LOCK STRIKERALL OKPROBLEMS ENCOUNTEREDACTION
Check that the striker fastening is correct.Move on to Step 2Incorrect striker fastening.Check that the striker fastening is correct    Op. 7005A10 FRONT SIDE DOOR - ADJUST STRIKER AND ADAPT SEAL IF NECESSARY
2DOOR CONTROLS CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check that the door opens/closes correctly by operating the:- Key- Safety knob- Exterior handle- Interior handleMove on to Step 31. Fault in the key.2. Fault in the knob.3. Fault in the exterior handle.4. Fault in the interior handle.1. Move on to Step 5.2. Move on to Step 5.3. Move on to Step 3.4. Move on to Step 4.
3EXTERIOR HANDLE CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the condition of the exterior handle.Move on to Step 5Exterior handle defective.Replace the exterior handle    Op. 7005C11 FRONT SIDE DOOR EXTERIOR HANDLE - R.R
4INTERIOR HANDLE CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the condition of the interior handle.Move on to Step 5Interior handle defective.Replace the interior handle    Op. 7005E10 FRONT SIDE DOOR INTERIOR PANEL - R.R.
5LOCK FASTENING CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check that the lock is correctly fastened to the door.Move on to Step 6Fault in lock fastening.Restore the correct fastening of the lock    Op. 7005M26 ELECTRIC WINDOW MECHANISM FOR ONE FRONT DOOR LH OR RH - R.R
6RODS CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the control and/or safety links are correctly fastened to the lock and handle.End of diagnosis1. Control rods attachment not correct.2. Control rods attachment not correct.1. Renew the correct fastening of the control links2. Renew the correct fastening of the safety link