| | Test results |
| 1 | CHECK ON MATCHING BETWEEN HEAD RESTRAINT RODS AND PLASTIC BUSHES | All OK | Problems encountered | Operation |
|---|
| Check for clearance between the head restraint rods and plastic bushes | Move on to Step 2 | Clearance between the head restraint rods and plastic bushes | Replace the bushes |
| 2 | CHECK ON MATCHING BETWEEN PLASTIC BUSH AND METAL SEAT | All OK | Problems encountered | Operation |
|---|
| Check for clearance between the plastic bush and the metal seat in the backrest frame | Move on to Step 3 | Clearance between the metal pipe and plastic bush | Replace the plastic bush (or increase the outer diameter using insulating tape) |
| 3 | CORRECT OPERATION CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the fault is no longer present | End of diagnosis | The fault persists | Replace the left backrest Op. 7050A13 SPLIT REAR SEAT LEFT BACKREST - R.R. Replace the right backrest Op. 7050A15 SPLIT REAR SEAT RIGHT BACKREST - R.R. |
