| | Test results |
| 0 | PRELIMINARY CHECKS | All OK | Problems encountered | Operation |
|---|
| Check that the noise is actually coming from the rear of the passenger compartment | Move on to Step 1 | The noise is coming from one of the rear doors | Proceed as instructed See table S063 REAR DOORS CREAKING |
| 1 | REAR SEAT FASTENINGS CHECK | All OK | Problems encountered | Operation |
|---|
| Check the correct fastening:- of the cushion to the body;- of the backrest to the luggage compartment bulkhead;- of the rear seat belt mountings to the body | Move on to Step 2 | 1. Seat fastenings not correct2. Rear seat belt fastening not correct | 1. Restore the correct fastening2. Restore the correct fastening Op. 7065B10 REAR SEAT BELT (ONE), LEFT OR RIGHT - R.R. |
| 2 | REAR PARCEL SHELF CHECK | All OK | Problems encountered | Operation |
|---|
| Remove the rear parcel shelf and check:- For the presence of noise prevention rubber mountings on the rear parcel shelf rear hooks;- That the elements on the rear parcel shelf (e.g. speakers) are correctly fastened;- That the boot wiring coupling is correctly insulated | Move on to Step 3 | 1. Rubber mountings or insulation missing2. Fastenings faulty | 1. Renew the rubbing mountings and insulating material2. Restore the correct fastening of the elements to the rear parcel shelf |
| 3 | REAR PILLAR COVER CHECK | All OK | Problems encountered | Operation |
|---|
| Remove the pillar covers and check:- for the presence of the felt between the pillar cover and the pillar;- for the presence of the felt between the pillar cover and the rear parcel shelf | Move on to Step 5 | Felt missing | Renew felt |
| 4 | SPLIT SEAT CHECK | All OK | Problems encountered | Operation |
|---|
| Remove the seat and check that the welding for the backrest perimeter joining back is correct | End of diagnosis | Welding faulty | Replace the seat assembly |
