198002091 - 1080B83 EXHAUST GAS TEMPERATURE SENSOR ON PARTICULATE FILTER (D.P.F.) - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Disconnect the electrical connection for the exhaust gas temperature sensor on the particle filter.

	Description	Connector
1	Downstream particle filter (DPF) temperature sensor	See K190 DOWNSTREAM PARTICULATE FILTER TEMPERATURE SENSOR (DPF)

2. Open the wiring retaining clip for the exhaust gas temperature sensor on the particle filter. - Raise the vehicle.1. Undo the bolts fixing the flexible mountings bracket for the front exhaust pipe to the bodyshell. 1. Undo the connector and remove the exhaust gas temperature sensor on the particulate filter (1b). Refitting ( Removing ) - Place the exhaust gas temperature sensor in its housing on the particle filter and tighten the connector to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Exhaust gas temperature sensor on particle filter	Connector	M14	4.0 ÷ 5.0	1.9 JTD

- Tighten the bolts fixing the flexible mountings bracket for the front exhaust pipe to the bodyshell.- Connect the electrical connection for the exhaust gas temperature sensor to the particle filter.- Close the wiring retaining clip for the exhaust gas temperature sensor on the particle filter.    Op. 1016A10 SOUND-PROOFING COVER - R.R - Remove the vehicle from the lift.