Removing
(
Refitting
)
1. Release the nut cover.2. Undo the nut and keep the washer.3. Remove the wiper arm.If necessary, use the special tool.
Tool
Description
Function
Validity
1878077000
Knife
Retainer removal
Refitting
(
Removing
)
- Check that the wiper arm and the blade are not damaged.1. Position the wiper arm in place, making blade (1a) coincide with mark (1b) screen-printed on the windscreen.2. Fit the washer and tighten the nut.
Component
Fastening
dia
Value (daNm)
Validity
Windscreen wiper arm
Nut
M8
1.4 ÷ 1.8
3. Engage the nut cover.
- Check that the windscreen wiper is working properly.
Removing
(
Refitting
)
1. Release the nut cover.2. Undo the nut and keep the washer.3. Remove the wiper arm.If necessary, use the special tool.
