198002298 - 5580C22 AIR BAG MODULE - PASSENGER SIDE - R.R

Removing ( Refitting )

Before removing and refitting the Air Bag module the following preliminary operations must be carried out.- Turn the ignition key to the OFF position and extract it;- Disconnect the battery leads and insulate them.- Wait for 10 minutes before continuing.

FOLLOW ALL THE RECOMMENDED SAFETY INSTRUCTIONS    Op. 5580C AIR BAG SYSTEM

    Op. 7040A14 FLAP FOR GLOVE COMPARTMENT IN DASHBOARD - R.R.    Op. 7040G22 BULB HOLDER/SWITCH FOR COMPARTMENT LIGHT IN DASHBOARD - R.R.    Op. 5570T49 BLUETOOTH ELECTRONIC CONTROL UNIT - R.R.     Op. 7040A45 RIGHT DASHBOARD SIDE TRIM - R.R.    Op. 7040L37 GEAR LEVER TRIM - R.R     Op. 7040L73 BOTTLE-HOLDER/ASHTRAY ON REAR TUNNEL TRIM - R.R.    Op. 7040L70 TUNNEL COVER REAR TRIM - R.R.    Op. 7040L20 TUNNEL COVER - R.R     Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.    Op. 7040A18 GLOVE COMPARTMENT IN DASHBOARD - ARRANGE 1. Undo the bolt.2. Move and lower the Air Bag module (2a) releasing the retainers (2b).3. Detach the electrical connection.

	Description	Connector
3	AIRBAG ON DASHBOARD (PASSENGER SIDE)	See Q011 AIR BAG IN DASHBOARD (PASSENGER SIDE)

4. Keep the passenger Air Bag module. - Place the Air Bag module in the special cupboard resting it on a free surface with the bag facing upwards. Refitting ( Removing ) - Observe the following precaution.

Handle the Air Bag module very carefully. Make sure that the battery is disconnected.If a new module is being fitted, position the labels. Remove the detachable part of the adhesive label from the new module and place it in the special folder containing the vehicle details (model, registration date, chassis number) and the serial number of the old module. The file should be kept for future checks. A new adhesive plate comes with the module and should be stuck on top of the existing one. Beforehand, however, it should be perforated at the month and 14 years after the year in which the module is being fitted (e.g. 2007 for 2021).

1. Secure the electrical connection.2. Position passenger Air Bag module (2a) and attach the retainers (2b).3. Tighten the bolt.

Component	Fastening	dia	Value (daNm)	Validity
Passenger Air Bag module	Bolt	M6	0.6 ÷ 1.0

    Op. 7040A18 GLOVE COMPARTMENT IN DASHBOARD - ARRANGE     Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.    Op. 7040L20 TUNNEL COVER - R.R     Op. 7040L70 TUNNEL COVER REAR TRIM - R.R.    Op. 7040L73 BOTTLE-HOLDER/ASHTRAY ON REAR TUNNEL TRIM - R.R.    Op. 7040L37 GEAR LEVER TRIM - R.R     Op. 7040A45 RIGHT DASHBOARD SIDE TRIM - R.R.    Op. 5570T49 BLUETOOTH ELECTRONIC CONTROL UNIT - R.R.     Op. 7040G22 BULB HOLDER/SWITCH FOR COMPARTMENT LIGHT IN DASHBOARD - R.R.    Op. 7040A14 FLAP FOR GLOVE COMPARTMENT IN DASHBOARD - R.R.- Connect the battery.- Use an Examiner to check that the system has not acquired errors during the operation.