198002303 - 5580C52 WINDOW BAG MODULE (ONE) LH OR RH - R.R WITH INTERFERING PARTS REMOVED

Removing ( Refitting )
Before removing and refitting the window bag module the following preliminary operations must be carried out:- Turn the ignition key to the OFF position and extract it;- Disconnect the battery leads and insulate them.- Wait for 10 minutes before continuing.
FOLLOW ALL THE RECOMMENDED SAFETY INSTRUCTIONS    Op. 5580C AIR BAG SYSTEM
1. Working at the front of the passenger compartment, unscrew the window bag link retaining bolt.2. Disconnect the rod (2a) from retainers (2b).
1. Working in the rear of the passenger compartment, disconnect the electrical connection.
DescriptionConnector
1DRIVER SIDE WINDOW BAG    See Q040 DRIVER'S HEAD BAG
1PASSENGER SIDE WINDOW BAG    See Q041 PASSENGER HEAD BAG
2. Undo the bolts fixing the rear section of the window bag module.
1. Undo the bolts securing the window bag module.2. Release the window bag module retainers using the special tool.
ToolDescriptionFunctionValidity
1823015000KnifeRetainer removal
3. Remove the window bag module assembly.
1. If necessary, undo the bolts (1a) and remove the window bag module mounting bracket (1b).
Refitting ( Removing ) - Observe the following precaution.
Handle the Air Bag module very carefully. Make sure that the battery is disconnected.
- If a new module is being fitted, position the labels. Remove the detachable part of the adhesive label from the new module and place it in the special folder containing the vehicle details (model, registration date, chassis number) and the serial number of the old module. The file should be kept for future checks. A new adhesive plate comes with the module and should be stuck on top of the existing one. Beforehand, however, it should be perforated at the month and 14 years after the year in which the module is being fitted (e.g. 2007 for 2021).- If removed, position the window bag mounting bracket and tighten the bolts.1. Position the window bag module.2. Attach the retainers for the window bag module.3. Tighten the bolts securing the window bag module.
ComponentFasteningdia  Value (daNm)Validity
Window Bag module Bolt M6 0.6 ÷ 1.0
1. Tighten the bolts fixing the rear section of the window bag module.
ComponentFasteningdia  Value (daNm)Validity
Window Bag module Bolt M6 0.6 ÷ 1.0
2. Secure the electrical connection.
1. Connect the front rod to the retainers.2. Tighten the front rod retaining bolt
ComponentFasteningdia  Value (daNm)Validity
Window Bag module Bolt M6 0.6 ÷ 1.0
- After completing refitting of the various parts, use an Examiner to check that the system contains no errors.