198002322 - 7005C35 BARREL FOR FRONT SIDE DOOR LOCK - R+R
Removing
(
Refitting
)
- Open the door.1. Release the rubber cover.2. Through opening (2a), loosen inner bolt (2b) until lock barrel assembly (2c) can be released with key (2d) inserted.
1. If necessary, disengage ends (1a) and remove panel (1b).2. Release end (2a) of retaining clip (2b), then extract it keeping retainer (2c) pressed.3. Insert key (3a) in lock barrel (3b) and extract it by pressing retainer (2c).
Refitting
(
Removing
)
- Check that the lock barrel for the key is not damaged.1. If removed, insert lock barrel (1b) with key (1a) in place, keeping retainer (1c) pressed.2. Fit retaining clip (2a), then attach end (2b).
1. Using key (1a), fit lock barrel (1b), attaching end (1c) in housing, then tighten lock barrel retaining bolt (1d).2. Fit the rubber cover.
Removing
(
Refitting
)
- Open the door.1. Release the rubber cover.2. Through opening (2a), loosen inner bolt (2b) until lock barrel assembly (2c) can be released with key (2d) inserted.
