198002336 - 7005E50 FRONT SIDE DOOR PILLAR TRIM (ONE) LH OR RH - R.R.

Removing ( Refitting ) - Lower the window to the end of travel position.1. Release the retaining button for the channel using the special tool.
ToolDescriptionFunctionValidity
1823015000KnifeRetainer removal
2. Release the inner channel (2a) in the area of the pillar cover (2b).3. Release the sliding window channel (2a) in the area of the pillar cover (2b).4. Undo the bolts fixing the pillar trim.5. Lift up the upper end (5a) of the channel, releasing it from the door frame.6. Remove the pillar outer cover sliding it upwards.
Refitting ( Removing ) - Check that the pillar trim is not damaged.1. Fit the pillar trim in place.2. Fit the upper end of the channel in place, attaching it to the door frame.3. Tighten the bolts fixing the pillar trim.4. Fit the sliding window channel (4a) in the area of the pillar cover (4b).
Use soapy water to facilitate fitting the sliding window channel in place.
5. Fit the inner channel (5a) in the area of the pillar cover (5b).6. Fit the channel retaining button.- Check that the window moves correctly.