198002353 - 7010A10 REAR SIDE DOOR - ADJUST STRIKER AND ADAPT SEAL IF NECESSARY

- Check that the front door is aligned, otherwise:    Op. 7005A10 FRONT SIDE DOOR - ADJUST STRIKER AND ADAPT SEAL IF NECESSARY - Open the rear door.1. Check that the door housing seal is not damaged along its perimeter, otherwise replace.2. Check that door housing seal coupling (2a) is in the position indicated in the diagram.3. If necessary, loosen bolts (3a) and move lock striker (3b) to the correct position using the slotted bolt holes. The arrows indicate the possible movements for the adjustment. 1. Tighten bolts (3a) to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Rear door lock striker	Bolt	M8	2.2 ÷ 2.6

- Check that the striker and the door lock are correctly matched and that the alignment is correct with the door closed.