198002370 - 7010D35 REAR SIDE DOOR MANUAL WINDOW MECHANISM (ONE), LEFT OR RIGHT - R.R.

Removing ( Refitting )     Op. 7010D38 REAR SIDE DOOR MANUAL WINDOW OPENING MECHANISM HANDLE/RING NUT (ONE), LEFT OR RIGHT - R.R     Op. 7010E38 REAR SIDE DOOR INTERIOR HANDLE-R R     Op. 7010E10 REAR SIDE DOOR INNER PANEL - R.R. OR REPLACE     Op. 7010A04 REAR SIDE DOOR WATER GUARD PROTECTION - R R OR ARRANGE WITH DOOR PANEL REMOVED 1. Provisionally connect window handle to splined shaft (1a), then move window (1b) until glass retainer (1c) is accessible (as in the diagram).2. Disengage retainer (1c) from window hole (2a) by pushing it outwards.3. Manually raise the window to the end of travel position, then secure using retainer (3a).4. Loosen the nuts fixing the window opening mechanism.5. Remove window opening mechanism (5a) from compartment (5b).
Refitting ( Removing ) - Check that the window opening mechanism is not damaged.1. Position window opening mechanism (1a) in place and tighten nuts (1b).
ComponentFasteningdia  Value (daNm)Validity
Rear door electric window Nut M6 0.7 ÷ 1.1
2. Remove retainer (2a) and manually lower window (2b), then engage window hole (2c) with window mechanism drive pin (2d).
- Temporarily insert the window handle on the splined shaft, then check that the window is moving correctly.    Op. 7010A04 REAR SIDE DOOR WATER GUARD PROTECTION - R R OR ARRANGE WITH DOOR PANEL REMOVED     Op. 7010E10 REAR SIDE DOOR INNER PANEL - R.R. OR REPLACE     Op. 7010E38 REAR SIDE DOOR INTERIOR HANDLE-R R     Op. 7010D38 REAR SIDE DOOR MANUAL WINDOW OPENING MECHANISM HANDLE/RING NUT (ONE), LEFT OR RIGHT - R.R