198002400 - 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR

Removing ( Refitting ) - Open the bonnet lid.1. Undo the bolts securing the lock.2. Move lock (2a) slightly aside and disconnect retainers (2b) and (2c) from operating cable (2d).3. Recover lock (2a). Refitting ( Removing ) - Check that the lock is not damaged.- Connect the control cable to the lock retainers.- Position the lock.- Do up the lock retaining bolts without tightening.1. Adjust the position of the lock.

The arrows indicate the possible movements.

2. Tighten the lock retaining bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Bonnet lid to bodyshell hinge	Bolt	M8	2.2 ÷ 2.7

- Check that the bonnet lid opens and closes properly.