198002440 - 7040H30 FRONT PILLAR TRIM (ONE), LEFT OR RIGHT - R.R.
Removing
(
Refitting
)
1. Prise up the door housing seal in the area of the front pillar cover.2. Release the cover.3. Undo the bolt.4. Release the inner retainers using the special tool.
Tool
Description
Function
Validity
1823015000
Knife
Retainer removal
5. Remove front pillar cover (5a), releasing air duct terminal (5b).
Refitting
(
Removing
)
- Check that the front pillar cover is not damaged.- Place the front pillar cover in position and engage the air duct terminal.- Engage the pillar cover inner retainers.- Tighten the bolt.- Engage the cover.- Fit the door compartment seal.
Removing
(
Refitting
)
1. Prise up the door housing seal in the area of the front pillar cover.2. Release the cover.3. Undo the bolt.4. Release the inner retainers using the special tool.