198002508 - 7210A31 R R FRONT SHOCK ABSORBER ATTACHMENT DOME, (ONE) LH OR RH
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	    Op. 7210E20  R.R. BONNET     Op. 7210E36  R.R. FRONT SIDE DOOR     Op. 7210E18  R.R. FRONT WING     Op. 7210A46 R R (COMPLETE) UPPER FRONT STRUT (ONE) LH OR RH    Op. 7210A32 R.R. PARTIAL FRONT SHOCK ABSORER TURRET MOUNTING (ONE), LEFT OR RIGHT- Ensure that the components connected are not distorted by checking the bodyshell alignment measurements with suitable equipment (gauges, templates or jigs).- Straighten the body as necessary.
		)
	    Op. 7210E20  R.R. BONNET     Op. 7210E36  R.R. FRONT SIDE DOOR     Op. 7210E18  R.R. FRONT WING     Op. 7210A46 R R (COMPLETE) UPPER FRONT STRUT (ONE) LH OR RH    Op. 7210A32 R.R. PARTIAL FRONT SHOCK ABSORER TURRET MOUNTING (ONE), LEFT OR RIGHT- Ensure that the components connected are not distorted by checking the bodyshell alignment measurements with suitable equipment (gauges, templates or jigs).- Straighten the body as necessary.


 Refitting
		(
		Removing
Refitting
		(
		Removing )
	1. Remove the anti-corrosion treatment from the entire perimeter of the inside and outside of the replacement part using a rotary brush.2. Drill out the part at the indicated points.- Apply electro-weldable paint to the edges involved.
		)
	1. Remove the anti-corrosion treatment from the entire perimeter of the inside and outside of the replacement part using a rotary brush.2. Drill out the part at the indicated points.- Apply electro-weldable paint to the edges involved.


