198002510 - 7210A35 R.R. LOWER FRONT STRUT/SIDE PANEL (COMPLETE) (ONE) LEFT OR RIGHT

Removing ( Refitting )     Op. 7210E20 R.R. BONNET     Op. 7210E36 R.R. FRONT SIDE DOOR     Op. 7210E18 R.R. FRONT WING     Op. 7210A46 R R (COMPLETE) UPPER FRONT STRUT (ONE) LH OR RH    Op. 7210A32 R.R. PARTIAL FRONT SHOCK ABSORER TURRET MOUNTING (ONE), LEFT OR RIGHT    Op. 7210A31 R R FRONT SHOCK ABSORBER ATTACHMENT DOME, (ONE) LH OR RH- Ensure that the components connected are not distorted by checking the bodyshell alignment measurements with suitable equipment (gauges, templates or jigs).- Straighten the body as necessary. - Use a rotary brush to remove the paint and gain access to the spot welds.1. Use the drill to chamfer the spot welds shown in the diagram.- Use a hammer and chisel to remove the previously chamfered spot welds.2. Remove the part from the vehicle. - Straighten the edges of the vehicle using a hammer and dolly block.- Remove the spot weld residues using a disc grinder.- Use a rotary brush to clean the previously treated areas.1. Apply electro-galvanizing paint. Refitting ( Removing ) 1. Remove the anti-corrosion treatment from the entire perimeter of the inside and outside of the replacement part using a rotary brush.2. Drill out the part at the indicated points.- Apply electro-weldable paint to the edges involved. 1. Position the replacement part correctly on the vehicle and secure it using self-locking clamps.- Check the alignment and the surrounding gaps.2. Use a MIG welder to fill weld the openings made previously. - Correct any distortions to the panel using a mallet and dolly block.1. Use a disc grinder to level the welds.- Use a rotary brush to clean the previously welded areas. 1. Apply anti-oxidant protection to the areas involved in the welding.- Seal the join lines between the replacement part and the vehicle.     Op. 7210A31 R R FRONT SHOCK ABSORBER ATTACHMENT DOME, (ONE) LH OR RH    Op. 7210A32 R.R. PARTIAL FRONT SHOCK ABSORER TURRET MOUNTING (ONE), LEFT OR RIGHT    Op. 7210A46 R R (COMPLETE) UPPER FRONT STRUT (ONE) LH OR RH    Op. 7210E18 R.R. FRONT WING     Op. 7210E36 R.R. FRONT SIDE DOOR     Op. 7210E20 R.R. BONNET