198002803 - 3350E30 LATERAL ACCELERATION AND SLEWING SENSOR - R.R

Removing ( Refitting )     Op. 7040L37 GEAR LEVER TRIM - R.R     Op. 7040L73 BOTTLE-HOLDER/ASHTRAY ON REAR TUNNEL TRIM - R.R.    Op. 7040L70 TUNNEL COVER REAR TRIM - R.R.    Op. 7040L20 TUNNEL COVER - R.R     Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.work on both sides.    Op. 7040A89 REINFORCEMENT BRACKET BETWEEN DASHBOARD SUPPORTING CROSSMEMER AND BODYSHELL - R.R.

Mark the position of the yaw sensor in relation to the direction of motion shown in the diagram.

1. Disconnect the electrical connection for the yaw sensor.

	Description	Connector
1	Yaw sensor (VDC)	See K074 SLEWING SENSOR (VDC)

2. Undo bolts (2a) and remove yaw sensor (2b). Refitting ( Removing ) - Refit the yaw sensor in its housing and tighten the bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Slewing sensor	Bolt	M6	0.7 ÷ 1.1

The yaw sensor must be fitted in the vehicle’s direction of motion, as shown in the diagram.

- Connect the electrical connection for the yaw sensor.    Op. 7040A89 REINFORCEMENT BRACKET BETWEEN DASHBOARD SUPPORTING CROSSMEMER AND BODYSHELL - R.R.    Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.work on both sides.    Op. 7040L20 TUNNEL COVER - R.R     Op. 7040L70 TUNNEL COVER REAR TRIM - R.R.    Op. 7040L73 BOTTLE-HOLDER/ASHTRAY ON REAR TUNNEL TRIM - R.R.    Op. 7040L37 GEAR LEVER TRIM - R.R