198002808 - 5020B10 HEATER CONTROL SUPPORT - R+R OR REPLACE

Removing ( Refitting )     Op. 7040A22 INSTRUMENT FACIA COMPLEMENTARY TRIM ELEMENT (ONE) - ARRANGE    Op. 2125C02 GEAR CONTROL LEVER OUTER GAITER R R     Op. 7040L37 GEAR LEVER TRIM - R.R     Op. 7040A47 ODDMENTS POCKET UNDER DASHBOARD - R.R.- Work on both sides.    Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.1. Remove the side rivets using a drill. Keep the removed parts of the rivets.2. Undo the bolts (2a) and remove the surround (2b).3. Undo the bolts (3a) securing the controls mounting (3b). 1. Move the controls mounting.2. Disconnect the electrical connections (2a, 2b).

	Description	Connector
2a	AIR CONDITIONER CONTROLS	See H080 AIR CONDITIONING CONTROLS
2b	CLIMATE CONTROL SYSTEM FAN CONTROL	See H081 CLIMATE CONTROL FAN CONTROL

3. Disconnect bulb holders (3a) and (3b).4. If necessary, remove the control lighting bulbs (press-fit).5. Undo clips at the transmission cable sheath ends.6. Disconnect the ends of the transmission cables from the control levers.7. Keep the control mount. Refitting ( Removing ) - Check that the control mount is not damaged.- Connect the ends of the transmission cables to the control levers.- Position the transmission cable sheath ends and secure with retainers.- If removed, fit the control lighting bulbs (press-fit).- Connect the bulb holders.- Connect the electrical connections.- Position the control mount.- Tighten the control mount bolts.- Position the frame and tighten the bolts.- Fit the side rivets.    Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.    Op. 7040A47 ODDMENTS POCKET UNDER DASHBOARD - R.R.    Op. 7040L37 GEAR LEVER TRIM - R.R     Op. 2125C02 GEAR CONTROL LEVER OUTER GAITER R R     Op. 7040A22 INSTRUMENT FACIA COMPLEMENTARY TRIM ELEMENT (ONE) - ARRANGE