| TEST RESULTS |
| 0 | PRELIMINARY CHECKS | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the volume of the telephone channel in the radio is not set to zero. | Move on to Step 9 | The volume is set to zero | Set it to a sufficiently high volume that can be heard. |
| 1 | TELEPHONES SUPPORTED CHECKS | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the customer''s telephone is one of those supported by the system on the vehicle listed above.Also check whether the switching takes place at all or if it is just slow. | Move on to Step 2 | 1. The customer''s telephone is not compatible with the system2. The switchover is very slow3. The switchover does not take place at all | 1. Move on to Step 22. A slow switchover is due to the order in which the system recognition has been carried out. If you wish this telephone to be the first one, move on to Step 73. Move on to Step 2 |
| 2 | BLUETOOTH CONTROL UNIT REPLACEMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| The system supplier constantly tests the software to check whether new telephones can be supported by the current system.If the answer is yes, this information will be supplied in a Service News.Update the software on a periodic basis; a more updated version that supports the Customer''s telephone may be available from the Parts Dept.In this case, this information will be supplied in a Service News.If this takes place, replace the Bluetooth control unit and check that the fault disappears. | Replacing a control unit to update the software is not a defect that is down to the vehicle and is not therefore covered under the warranty. The expenses are the responsibility of the Customer |
| End of diagnosis | 1. According to the instructions in the Service News, the telephone is compatible with the system2. There are no updates to make the telephone and system compatible3. The fault persists even after the update | 1. Move on to Step 32. The problem cannot be solved through the incompatibility of the telephone with the vehicle system3. Move on to Step 3 |
| 3 | BLUETOOTH OPERATION CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check whether the telephone is cable of connecting via Bluetooth to other systems such as other mobile phones, earphone systems or computers. | Move on to Step 4 | The telephone is not capable of dialogue even with other Bluetooth systems | Move on to Step 3 |
| 4 | BLUETOOTH ACTIVATION CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the Bluetooth operation has been activated at the telephone: if there are doubts, consult the mobile phone manual to identify the Bluetooth function status | Move on to Step 5 | The Bluetooth function is not activated | Activate the Bluetooth function: if there are doubts, consult the mobile phone manual to carry out the activation. |
| 5 | SYSTEM AUTHORIZATION CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the system on the vehicle has been authorized for automatic connection to the telephone | Move on to Step 6 | The system on the vehicle is not authorized for automatic connection | Activate the connection at the radio in the hands-free telephone menu. |
| 6 | SYSTEM RECOGNITION ACTIVATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Carry out the system recognition procedure for the telephone: if there are doubts, consult the mobile phone manual to carry out the system recognition. Make sure that the procedure has been successful and the fault has disappeared | The system asks the telephone to enter an activation code. It can be found in the vehicle Owner''s Handbook. |
| End of diagnosis | 1. The outcome of the recognition procedure is not successful2. The recognition procedure is successful, but the fault persists | 1. Move on to Step 72. Move on to Step 8 |
| 7 | DELETING TELEPHONES RECOGNIZED BY THE SYSTEM | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Delete the telephones recognized by the telephone system | End of diagnosis | The outcome of the deletion procedure is not successful | Move on to Step 8 |
| 8 | ELECTRICAL CIRCUIT CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check the continuity and insulation of the electrical circuit between the steering wheel button, the Bluetooth control unit and the radio See E3570 INTEGRATED RADIO PHONEAlso check that the connectors for the control unit and the radio are not faulty. | End of diagnosis | 1. Electrical connections faulty2. Call opening/closing button faulty3. Faults in the Bluetooth control unit connectors4. Faults in the radio connectors | 1. Restore the correct connections2. Replace the controls on the steering wheel3. Replace the Bluetooth control unit Op. 5570T49 BLUETOOTH ELECTRONIC CONTROL UNIT - R.R. 4. Replace the radio Op. 5570T80 CAR RADIO EQUIPMENT - R+R |