1. Release the retainer (1a) for the cushion cover and lift up the edge (1b) of the cover.2. Disconnect the retainers (2a) under the seat for the side bag cable loom (2b).
1. Working on the electrical connection for the seat, release the retainer (1a) and remove the cover (1b) by sliding it along the guides.2. Release the retainers (2a) and remove the electrical connection (2b), then keep the side bag cable loom (2c).
Refitting
(
Removing
)
- Check that the side bag cable loom is not damaged and that the individual conductors are correctly fastened to the connections.If necessary, carry out continuity tests.- Insert the side bag cable loom electrical connection into the electrical connection for the seat and engage the retainers.- Insert the cover into its housing by sliding it along the guides, then engage the retainer.- Connect the retainers under the seat for the side bag cable loom.- Place the edge of the cover in position, then attach the cushion cover retainer.- Insert the side bag cable loom into the openings in the backrest.- Attach the side bag cable loom retainers to the backrest frame. Op. 5580C44 FRONT SIDE BAG MODULE (ONE) LH OR RH - R.R Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.
Removing
(
Refitting
)
Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R. Op. 5580C44 FRONT SIDE BAG MODULE (ONE) LH OR RH - R.R 1. Release the retainers (1b) for the Air Bag wiring (1c) from the backrest frame (1a).2. Extract the Air Bag wiring (1c) from the backrest openings (2a) and (2b).
