198003116 - 7055A62 MOULDING ON ONE PILLAR, LEFT OR RIGHT - R.R.

Removing ( Refitting ) MOULDING ON THE FRONT PILLAR1. Using a plastic blade, remove the moulding (1a), releasing the inner retainers (1b) and the adhesive strips (1c). MOULDING ON THE REAR PILLAR1. Using a plastic blade, remove the moulding (1a), releasing the inner retainers (1b). Refitting ( Removing ) - Check that the trim is not damaged.MOULDING ON THE FRONT PILLAR1. Clean the areas (1a) where the adhesive parts (1b) of the moulding are secured using heptane.2. Remove adhesive pad protections (2a) and immediately fit the moulding (2b) in place, attaching the inner retainers and the adhesive pads.3. Press hard on the moulding over the adhesive pads for a few seconds.- Check that the moulding is correctly positioned.MOULDING ON THE REAR PILLAR- Place the moulding in position and attach the inner retainers.