198000164 - 0510A20 TIMING GEAR WITH BELT DRIVE - CHECK - CARRY OUT OPERATION WITH TAPPET COVER(S) REMOVED AND TAPPETS ADJUSTED AND CRANKSHAFT PULLEY DETACHED (IF NECESSARY)

    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 1072B53 AIR CHAMBER REINFORCEMENT BRACKET - R.R.    Op. 1056B65 SOUND INSULATING COVER FOR INJECTOR ASSEMBLY - R.R. 1. Remove the camshaft protective plug, inlet side.2. Rotate the crankshaft in its normal direction of rotation and fit the camshaft timing tool, inlet side.
ToolDescriptionFunctionValidity
1860985000Locating pinsCamshaft timing1.4 16v
- Undo the bolts and remove the ignition coils for the 1st and 2nd cylinder referring to    Op. 5510C14 IGNITION COIL/S - R.R. - Remove the spark plugs for the 1st and 2nd cylinders referring to    Op. 5510D10 SPARK PLUGS - R+R 1. Position the tools (1a) in the seats for the spark plug for 1st and 2nd cylinder, tightening the pins (1b) to a torque of 0.5 daNm.
ToolDescriptionFunctionValidity
1860992000BearingsCrankshaft timing1.4 16v
2. Check that the moving pins for the tool fitted previously are aligned with one another.