198002133 - 2125C32 GEARBOX HAND CONTROL LEVER MOUNTING - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 2125C02 GEAR CONTROL LEVER OUTER GAITER R R     Op. 1076B30 FRONT EXHAUST SILENCER - R + R     Op. 1076A42 FRONT EXHAUST SILENCER FRONT HEAT SHILED R R 1. Undo the bolts (1a) and remove the cover (1b) from the gearbox hand lever support. 1. Disconnect the cables (1a), remove the clips (1b) and disconnect the gear selection and engagement cables (1c) from the gearbox hand lever support. 1. If necessary, release the trim (1a), undo the bolt (1b) and remove the gear lever knob (1c). Refitting ( Removing ) - Place the knob back in position, secure it to the gear lever using the bolt and fit the trim on the knob.- Using manual pressure, connect the ends of the gear selection and engagement cables to the ball joints for the levers on the mounting.- Fit the cover for the mounting and secure it using the bolts.    Op. 1076A42 FRONT EXHAUST SILENCER FRONT HEAT SHILED R R     Op. 1076B30 FRONT EXHAUST SILENCER - R + R     Op. 2125C02 GEAR CONTROL LEVER OUTER GAITER R R - Remove the vehicle from the lift.