Refitting
(
Removing
)
- Check that the control cable is not damaged.1. Connect the end of the control cable (1a) to the retainer (1b).Position the band (1c) and screw in the bolt (1d) without tightening it.- Provisionally refit the air conditioning controls mounting on the end (2a) of the control cable. Op. 5040D10 AIR CONDITIONER CONTROLS SUPPORT - R+R OR REPLACE2. Align the end of travel positions for the air conditioning controls with the two end of travel positions (2b) and (2c) for the linkage, adjusting the position of the band (1c) in relation to the control cable outer casing. Tighten the bolt (1d) after the adjustment.- Remove the air conditioning controls mounting from the end (2a) of the control cable.