198000030 - 5510C14 IGNITION COIL/S - R.R.

Removing ( Refitting )     Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Detach the timing sensor electrical connection.
DescriptionConnector
1Timing sensor    See K047 TIMING SENSOR
2. Undo the bolt and remove the earth lead.- Move the ignition coils electrical connections safely clips.3. Unscrew the nut securing the wiring harness duct.4. Raise the clip and move the wiring harness duct.5. Disconnect the electrical connections from the ignition coils, releasing the wiring harness duct from the stud.
DescriptionConnector
5Ignition coil    See A030 IGNITION COIL
6. Undo the bolts and remove the ignition coils.
Refitting ( Removing ) - Place the ignition coils in their housings and tighten the bolts to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Ignition coilsBoltM60.91.4 16v
- Connect the electrical connections for the ignition coils.- Tighten the the nut securing the wiring harness duct.and fasten the retaining clip.- Connect the earth lead and tighten the bolt.- Secure the electrical connection for the timing sensor.     Op. 1016A10 SOUND-PROOFING COVER - R.R