198000078 - 1008B30 GEARBOX SIDE SUPPORT FLEXIBLE MOUNTING(S) - REPLACE
Removing
(
Refitting
)
- Position the vehicle on a lift. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 5530B10 BATTERY - R+R Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R
- Position an arm lift underneath the gearbox.1. Undo bolts (1a) and nut (1b) then remove the gearbox side support flexible mounting (1c).
Refitting
(
Removing
)
- Fit the gearbox side support flexible mounting and tighten the new fastenings to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Gearbox side support flexible mounting to bodyshell | Bolt (to be replaced) | M10 | 5.4 ÷ 6.6 |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Gearbox side support flexible mounting to bodyshell | Bolt (to be replaced) | M12 | 7.7 ÷ 9.3 |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Gearbox side support flexible mounting to rigid support | Nut (to replace) | M12 | 9.0 ÷ 11.0 |