198000123 - 1080B95 REAR LAMBDA SENSOR TO CATALYTIC CONVERTER - R.R

Removing ( Refitting ) 1. Disconnect the electrical connection for the rear Lambda sensor to the catalytic converter.

	Description	Connector
1	Lambda sensor on catalytic converter	See K017 LAMBDA SENSOR ON CATALYZER

- Release the wiring from the intermediate retaining clips. 1. Unscrew and remove the rear Lambda sensor from the catalytic converter. Refitting ( Removing ) - Refit the rear Lambda sensor in its housing on the catalytic converter and tighten it to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Lambda sensor	-	M18	4.1 ÷ 5.0	1.4 16v

- Connect the electrical connection for the rear Lamba sensor to the catalytic converter and secure the wiring into the associated retaining clips.