1076B20 REAR EXHAUST SILENCER - R + R - Fiat - NUOVA BRAVO - eLearn

198000180 - 1076B20 REAR EXHAUST SILENCER - R + R

) - Position the vehicle on a lift.1. Undo the nuts and disconnect the exhaust pipe front section from the front silencer.- Remove the gasket.2. Loosen collar (2a), disconnect front exhaust silencer (2b) from flexible mountings and from rear silencer.

1. Undo the bolt fixing the rear exhaust silencer mounting to the bodyshell.2. Release rear exhaust silencer (2a) from flexible mounting (2b) and remove it.

- If necessary, remove the rear flexible mounting.

Refitting ( Removing

) - refit the rear exhaust silencer in its housing, connect it to the front flexible mounting and close the rear mount bolt.- Connect the front exhaust silencer to the rear silencer, to the flexible mountings and tighten the collar nut to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front/rear exhaust pipe collar	Nut	M10	4.0 ÷ 5.0

- Fit a new seal, connect the the exhaust pipe front section to the front silencer and tighten the nuts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front section connection flange to front exhaust silencer	Nut	M8	2.2 ÷ 2.7	1.4 16v TJet

- Remove the vehicle from the lift.