198000214 - 4410B40 LOWER TRACK CONTROL ARM (WITH BALLJOINT) FOR LEFT OR RIGHT FRONT SUSPENSION (ONE) - R+R - CHECK WHEEL GEOMETRY SEPARATELY

Removing ( Refitting )

The removal-refitting of the left-hand side lower wishbone is shown below; proceed in the same way for the right-hand side.

    Op. 4450B02 LEFT FRONT WHEEL - R.R     Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R. 1. Undo the bolt securing the left wishbone to the wheel strut.2. Undo bolts (2a) securing wishbone (2b) to the suspension crossmember and remove it. Refitting ( Removing ) - Place the wishbone in its housing and tighten the bolts securing it to the suspension crossmember to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Lower track control arm to front suspension crossmember	Bolt	M12	11.5 ÷ 12.5

Component	Fastening	dia	Value (daNm)	Validity
Lower track control arm to front suspension crossmember	Bolt	M14	17.5 ÷ 19.5

- Tighten the bolt securing the wishbone to the wheel strut to the recomended torque.

Component	Fastening	dia	Value (daNm)	Validity
Lower track control arm to steering knuckle	Bolt	M10	6.3 ÷ 7.7

    Op. 7055B65 ENGINE COMPARTMENT DUST COVER IN LEFT FRONT WHEEL ARCH - R.R.     Op. 4450B02 LEFT FRONT WHEEL - R.R