198000231 - 1020D14 FRONT CRANKSHAFT OIL SEAL COVER - R.R AND REPLACE SEALS FOR VERSIONS WITH OIL PUMP ON CRANKSHAFT, TIMING SIDE

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 0010T12 ENGINE OIL AND FILTER - REPLACE     Op. 0010T20 ENGINE COOLANT - CHANGE     Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 1056B65 SOUND INSULATING COVER FOR INJECTOR ASSEMBLY - R.R.    Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1072B53 AIR CHAMBER REINFORCEMENT BRACKET - R.R.    Op. 1064A31 HEAT SHIELD FOR TURBOCHARGER - R.R.    Op. 1076A48 CATALYTIC CONVERTER HEAT SHIELD - R.R    Op. 1080B62 CATALYTIC CONVERTER - R + R     Op. 1084C22 HEAT SHIELD ON ENGINE OIL HEAT EXCHANGER - R.R.     Op. 1084B42 ENGINE OIL RETURN PIPE FROM TURBO - R + R     Op. 1088D55 COOLANT SUPPLY PIPE TO ENGINE OIL HEAT EXCHANGER - R.R.    Op. 1088D51 COOLANT SUPPLY PIPE FROM CRANKCASE TO OIL/WATER HEAT EXCHANGER - R.R. WITH REAR ENGINE SUPPORT REMOVED    Op. 1084B40 ENGINE OIL DELIVERY PIPE TO TURBOCHARGER - R + R     Op. 1084B36 ENGINE OIL FILTER MOUNTING AND HEAT EXCHANGER - R.R     Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE     Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.     Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT - Provisionally fit the Power unit mounting rigid mount and flexible mounting, timing side and remove the arm lift from under the engine oil sump.- Raise the vehicle and remove the engine oil sump, refer to    Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION     Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED 1. Undo the bolt and move the engine rpm sensor aside without disconnecting the electrical connection.2. Disconnect the electrical connection for the minimum engine oil pressure switch.
DescriptionConnector
2Engine oil pressure sensor (switch)    See K030 ENGINE OIL PRESSURE SENSOR (SWITCH)
3. Undo the bolts and remove the crankshaft oil seal front cover.- Remove the gasket.
Refitting ( Removing ) - Place the crankshaft front cover in its seat complete with gasket and tighten the bolts to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Crankshaft oil seal front coverBoltM60.8 ÷ 1.01.4 16v
- Connect the electrical connection for the minimum engine oil pressure switch.- Position the engine rpm sensor in its housing and secure it using the bolt. - Fit the engine oil sump, refer to    Op. 1020A20 CRANKCASE OIL SUMP - R.R CLEAN SURFACES FOR SEALANT APPLICATION - Position the arm lift under the engine oil sump and remove the Power unit mounting flexible mounting and rigid mount, timing side.    Op. 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED     Op. 1032B10 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT     Op. 1008A46 POWER UNIT RIGID SUPPORT - TIMING SIDE - R.R.     Op. 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE     Op. 1084B36 ENGINE OIL FILTER MOUNTING AND HEAT EXCHANGER - R.R     Op. 1084B40 ENGINE OIL DELIVERY PIPE TO TURBOCHARGER - R + R     Op. 1088D51 COOLANT SUPPLY PIPE FROM CRANKCASE TO OIL/WATER HEAT EXCHANGER - R.R. WITH REAR ENGINE SUPPORT REMOVED    Op. 1088D55 COOLANT SUPPLY PIPE TO ENGINE OIL HEAT EXCHANGER - R.R.    Op. 1084B42 ENGINE OIL RETURN PIPE FROM TURBO - R + R     Op. 1084C22 HEAT SHIELD ON ENGINE OIL HEAT EXCHANGER - R.R.     Op. 1080B62 CATALYTIC CONVERTER - R + R     Op. 1076A48 CATALYTIC CONVERTER HEAT SHIELD - R.R    Op. 1064A31 HEAT SHIELD FOR TURBOCHARGER - R.R.    Op. 1072B53 AIR CHAMBER REINFORCEMENT BRACKET - R.R.    Op. 1032D27 TIMING SYSTEM FRONT PROTECTIVE COVER (LOWER PART) - R.R.    Op. 1032D26 TIMING SYSTEM FRONT PROTECTIVE COVER (UPPER PART) - R.R.    Op. 1092A10 CRANKSHAFT PULLEY - R + R     Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R.     Op. 4450B04 RIGHT FRONT WHEEL - R.R     Op. 1056B65 SOUND INSULATING COVER FOR INJECTOR ASSEMBLY - R.R.    Op. 1016A10 SOUND-PROOFING COVER - R.R     Op. 0010T12 ENGINE OIL AND FILTER - REPLACE     Op. 0010T20 ENGINE COOLANT - CHANGE     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.