198001707 - D073 CRUISE CONTROL DOES NOT GO OFF WHEN THE CLUTCH PEDAL IS PRESSED

1	CLUTCH SWITCH CHECK	All OK	Problems encountered	Operation
	Check that the clutch pedal switch is working properly	Move on to Step 2	No continuity	Replace the clutch pedal switch    Op. 1056B78 SWITCH ON CLUTCH PEDAL - R.R (PETROL ENGINES)
2	ENGINE MANAGEMENT CONTROL UNIT CONNECTIONS CHECK	All OK	Problems encountered	Operation
	Check the continuity of the wiring between the clutch switch and the engine control unit    See E5030 PETROL ENGINES ELECTRONIC MANAGEMENT	Move on to Step 3	Wiring broken	Restore the correct connections    See E5030 PETROL ENGINES ELECTRONIC MANAGEMENT
3	CORRECT OPERATION CHECK	All OK	Problems encountered	Operation
	Check that the fault is no longer present by carrying out    See Test 5580AE CRUISE CONTROL OPERATION ROAD TEST CHECK	End of diagnosis	The fault persists: engine control unit defective	Replace the engine management control unit    Op. 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R