198001754 - I007 DIPPED BEAM (ONE) RH OR LH NOT WORKING

One of the two main beam headlamps is not working.

		TEST RESULTS
1	ELECTRICAL SYSTEM CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the condition of the fuse for the light power circuit in the Dashboard Junction Unit    See E2011 DIPPED HEADLAMPS	Move on to Step 2	Fuse blown	Replace the fuse and find out what caused it blow.
2	ELECTRICAL SYSTEM CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the continuity and the insulation of the wiring between the headlamp and the Dashboard Junction Unit    See E2011 DIPPED HEADLAMPS	Move on to Step 3	Electrical connection break or short circuit	Restore the electrical connection    See E2011 DIPPED HEADLAMPS
3	BULB CONDITION CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the continuity of the halogen bulb filament or for a possible internal short circuit	Move on to Step 4	Bulb inefficient	Replace the bulb    Op. 5540B25 LOW BEAM BULB (ONE) FOR ONE HEADLAMP/LIGHT CLUSTER LH OR RH - R.R
4	ELECTRICAL SYSTEM CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the continuity and the insulation of the internal wiring between the outlet connector for the Dashboard Junction Unit and the Fuse for the power circuit    See E2011 DIPPED HEADLAMPS	Move on to Step 5	Interruption or no insulation for the Dashboard Junction Unit internal connection	Replace Dashboard Junction Unit    Op. 5505A35 MAIN BODY COMPUTER/JUNCTION UNIT - R.R.
5	LAMP ELECTRICAL SYSTEM CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the condition of the internal headlamp connections between the connector and bulb holder	End of diagnosis	Internal wires broken or lacking insulation.	Restore the electrical connection, replacing the lamp if necessary    See E2011 DIPPED HEADLAMPS