198001785 - I080 HEADLAMP ALIGNMENT CORRECTOR NOT WORKING

When the buttons which control the headlamp alignment are operated (with the dipped headlamps on) it does not work. If the dipped headlamps are not working either, firstly    See table I005 DIPPED HEADLAMPS NOT WORKING

		Test results
1	ADJUSTMENT ELECTRICAL CIRCUIT CHECK	All OK	Problems encountered	Operation
	Check:- connections between control panel and NQS;- connection between Dashboard Control Unit and instrument panel- connection between dashboard junction unit unit and headlamp alignment motors;- earth for headlamp alignment motors- power supply for headlamp alignment motors    See E3080 HEADLAMP AGLINMENT CORRECTOR	Move on to Step 2	1. Connections between control panel and NQS not correct2. Connection between NQS and dashboard junction unit not correct3. Control panel not working4. Motor earths defective5. Motor power supply interrupted	1. Restore the correct connections    See E3080 HEADLAMP AGLINMENT CORRECTOR 2. Restore the correct connections    See E3080 HEADLAMP AGLINMENT CORRECTOR 3. Move on to Step 24. Repair the earth contacts    See E3080 HEADLAMP AGLINMENT CORRECTOR 5. Restore correct power supply
2	CONTROL PANEL CHECK	All OK	Problems encountered	Operation
	Check that the UP - DOWN buttons in the control panel are working properly	Move on to Step 3	Control panel defective	Replace the control panel    Op. 7040A56 SWITCH UNIT IN DASHBOARD - R.R.
3	HEADLAMP ALIGNMENT CONTROL CHECK	All OK	Problems encountered	Operation
	Check the operation of the headlamp alignment motor    See E3080 HEADLAMP AGLINMENT CORRECTOR	End of diagnosis	Headlamp alignment motor faulty	Replace the headlamp alignment motor