198001809 - K006 TRIP METER DOES NOT ZERO

With the key on, the trip meter does not zero when the TRIP button on the right steering column switch unit lever is operated.

1	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the Examiner diagnostic equipment to the diagnostic socket.Check that there are no faults in the instrument panel	Move on to Step 2	Presence of errors	Continue following the instructions for the diagnostic equipment
2	ELECTRICAL CIRCUIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check: Connections between right steering column switch unit lever and instrument panel Connections between right steering column switch unit lever and earth     See E4010 INSTRUMENT PANEL	Move on to Step 3	Connections defective, earth or power supply defective	Restore the correct connections, if necessary, replace the wiring.
3	STEERING COLUMN SWITCH UNIT CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the TRIP button the right steering column switch unit lever is working properly    See E4010 INSTRUMENT PANEL	Move on to Step 4	Right lever defective	Replace the steering column switch unit    Op. 5550A10 STALK UNIT ASSEMBLY - R+R
4	CORRECT OPERATION CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present	End of diagnosis