198001837 - K054 VEHICLE PROTECTION WARNING LIGHT OFF (ENGINE DOES NOT START)

with the key on and the engine off, the warning light must be on; it should go off when the engine is running.

		TEST RESULTS
1	ERROR CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check for the presence of one or more of the following errors using the Examiner in Instrument Panel Node mode:- CAN line- EEPROM memory	Move on to Step 2	1. Detected "no additional information" and/or "BUS off".2. Fault in EEPROM memory	1. Continue as instructed by the diagnostic equipment.2. Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R
2	ACTIVE DIAGNOSIS CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Use the Examiner to check the Autotest function is correctly activated in Active Diagnosis mode	Move on to Step 3	1.The function in question is not controlled by Active Diagnosis2.The function is controlled by active diagnosis	1.Replace the Instrument Panel    Op. 5560B10 CONTROL PANEL - R+R 2.Move on to Step 3
3	CHECK USING THE EXAMINER	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Keeping the diagnostic equipment connected, connect to the engine management control unit and check for the presence of errors.	End of diagnosis	Presence of errors in the engine management control unit.	Continue as instructed by the diagnostic equipment.