198001858 - K104 DISPLAY DOES NOT SHOW HEADLAMP ALIGNMENT DATA

When theMode+ and Mode- buttons which control the headlamp alignment are operated (with the dipped headlamps on) the information on the display does not change. If the headlamp alignment is not working    See table I080 HEADLAMP ALIGNMENT CORRECTOR NOT WORKING

1	HEADLAMP ALIGNMENT ELECTRICAL CIRCUIT CHECK	All OK	Problems encountered	Operation
	Check:- connection between centre control panel in dashboard and instrument panel;- Earthh connection for panel in dashboard    See E3080 HEADLAMP AGLINMENT CORRECTOR	Move on to Step 2	Connections not correct	Restore the correct connections    See E3080 HEADLAMP AGLINMENT CORRECTOR
			Earth defective	Restore correct earth contacts    See E3080 HEADLAMP AGLINMENT CORRECTOR
			Control panel in dashboard defective	Replace the centre control panel in the dashboard
2	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket and check that all the display segments are working properly at the Instrument Panel in active diagnosis	Move on to Step 3	One or more segments not working	Replace the instrument panel    Op. 5560B10 CONTROL PANEL - R+R