K140 FUEL RESERVE WARNING LIGHT ON (WITH HIGHER LEVEL) - Fiat - NUOVA BRAVO - eLearn

The Cilc sends a message to the Body Computer which makes it available to the Instrument Panel Node via the B-CAN.

1	PRELIMINARY CHECKS	All OK	Problems encountered	Operation
	Check that the fuel level is not in the reserve condition	Move on to Step 2	Fuel level gauge on reserve	Restore the correct level
2	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Check using the Examiner in active diagnosis that the fuel reserve warning light is correctly activated	Move on to Step 3	The warning light does not flash	Replace the instrument panel Op. 5560B10 CONTROL PANEL - R+R
3	FUEL LEVEL GAUGE CHECK	All OK	Problems encountered	Operation
	- Check the insulation of the wiring to the fuel gauge earth- Check the fuel level gauge is working properly	Move on to Step 3	The wiring is short circuited	Restore wiring insulation
		Move on to Step 3	Fuel gauge defective	Change the level gauge Op. 1040A70 SUBMERGED PUMP ASSEMBLY COMPLETE WITH LEVEL GAUGE CONTROL - R + R
4	CORRECT OPERATION CHECK	All OK	Problems encountered	Operation
	Check that the body computer is working properly	End of diagnosis	Body Computer defective	Replace Body Computer Op. 5505A35 MAIN BODY COMPUTER/JUNCTION UNIT - R.R.