| | Test results |
| 1 | MOVEMENT OF LOWER FASTENINGS CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the lower backrest fastenings on the vehicle move freely (quick coupling to wheel compartment) | Move on to Step 2 | Interference from foreign objects or fastening elements | Remove the causes of the interference |
| 2 | CHECK ON MATCHING BETWEEN BACKREST AND VEHICLE INTERIOR TRIM | All OK | Problems encountered | Operation |
|---|
| Check the matching of the backrest with the vehicle interior trim (wheel compartment coverings, door panels, etc.) by folding the backrest over. | Move on to Step 3 | Interference from trims | Reposition the trims and/or carry out the correct backrest fitting cycle |
| 3 | CENTRE BRACKET CONDITION CHECK | All OK | Problems encountered | Operation |
|---|
| Check the condition of the centre bracket (for the split seat). Also check there is no knock. | Move on to Step 4 | No plastic bush on the rotation pin | Remove the backrest and fit the plastic noise prevention bush |
| 4 | CENTRE BRACKET CORRECT FASTENING CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the fastening of the centre bracket with the backrest structure and with the floor is correct | Move on to Step 5 | Incorrect fastening of bracket with backrest and/or with floor | Retighten the bolts securing the centre bracket to the backrest and/or the floor to the correct torque |
| 5 | CORRECT OPERATION CHECK | All OK | Problems encountered | Operation |
|---|
| Check that the fault is no longer present | End of diagnosis | The fault persists | Replace the left backrest Op. 7050A13 SPLIT REAR SEAT LEFT BACKREST - R.R. Replace the right backrest Op. 7050A15 SPLIT REAR SEAT RIGHT BACKREST - R.R. |
