| 1 | CHECK SUNROOF DEVICES | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Remove the glass panel Op. 7030B18 SLIDING ROOF GLASS PANEL - R+R Check the operation of the sunroof operating devices. In particular, check:- presence of rear end stop bolts.
| Move on to Step 2 | 1. Guides dirty. | 1. Clean the guides with a vacuum cleaner and reapply grease if necessary using Molikote PG75 in the mechanism slide area. |
| 2. End stop bolts missing. | 2. Restore the bolts and the entire feed mechanism |
| 3. Guides detached | 3. Restore the feed mechanism Op. 7030B50 SUN ROOF SLIDING GUIDE (ONE), LH OR RH - R.R |
| 2 | CHECK SUNROOF CONTROL DEVICES | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Remove the motor Op. 7030B70 SUN ROOF MOVEMENT MOTOR - R+R Check the operation of the sunroof operating devices.In particular, check: | Move on to Step 3 | Faults in sunroof operating devices. | Replace the affected parts. |
| 3 | CHECK SUNROOF CONTROL DEVICE ALIGNMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|
| Check that the sun roof assembly is fitted correctly.In particular, check:- that the slides are correctly aligned with the timing points;
- that the cable racks are correctly fastened and intact.
| End of diagnosis | Faults with the sun roof installation. | Check that the sun roof is fitted correctly. Op. 7030B12 SLIDING ROOF (ASSEMBLY) - R+R |
