1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R - Fiat - NUOVA BRAVO - eLearn

198002084 - 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R

) - Position the vehicle on a lift.1. Disconnect the electrical connection for the rear Lambda sensor to the catalytic converter.

	Description	Connector
1	Lambda sensor on catalytic converter	See K017 LAMBDA SENSOR ON CATALYZER

- Release the wiring from the intermediate retaining clips.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. 1. Undo the bolt fixing the collar for the exhaust pipe to the mounting bracket.2. Undo the nuts (2a), (2b) and remove the exhaust pipe (2c) complete with Lambda sensor.- Keep the gaskets.

- If necessary, undo the Lambda sensor and remove it.

Refitting ( Removing

) - Refit the exhaust pipe in its housing with lambda sensor and new seals and tighten the nuts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Intermediate exhaust pipe with flexible section	Nut	M8	2.3 ÷ 2.8	1.4 16v TJet

- Tighten the bolt fixing the collar for the exhaust pipe to the mounting bracket. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. - Connect the electrical connection for the rear Lambda sensor to the catalytic converter and attach the wiring using the intermediate retaining clips.- Remove the vehicle from the lift.