198002123 - 1820B38 CLUTCH HYDRAULIC ACTUATOR - R.R. AND BLEED AIR WITH GEARBOX REMOVED

Removing ( Refitting ) 1. Adjust the clip (1a) and remove the three-way connector (1b). 1. Undo the bolts (1a), compress the retaining clips (1b) and remove the hydraulic clutch actuator (1c). Refitting ( Removing ) - Place the hydraulic clutch actuator in position and attach the clips securing the pipe to the gearbox.- Tighten the bolts fixing the hydraulic clutch actuator to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Hydraulic clutch actuator	Bolt	M8	1.8 ÷ 2.2	1.4 16v

- Refit the three-way fitting in its seat and secure with the retaining clip.