2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R - Fiat - NUOVA BRAVO - eLearn

198002134 - 2710A14 RIGHT DRIVESHAFT WITH JOINTS AND INTERMEDIATE DRIVESHAFT - R+R

) - Position the vehicle on a lift. Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 0010T40 CHANGE MANUAL GEARBOX OIL 1. Remove the staking (1a), fit the tool (1b) and undo the wheel hub fixing nut.

Tool	Description	Function	Validity
1870815000	Counter-torque	Loosen/ tighten nut securing front drive shaft to wheel hub

1. Unscrew the nut (1a), fit the tool (1b) and disconnect the steering rod (1c) from the wheel strut.

Tool	Description	Function	Validity
1871000700	Extractor	Extracting steering rod from strut

2. Undo the bolts securing the shock absorber to the wheel strut.

1. Undo the bolts fixing the brake disc to the wheel hub.

1. Using the tool, retract the right driveshaft from the wheel hub and secure the brake disc assembly appropriately.

Tool	Description	Function	Validity
2000001600	Extractor	Retract axle shaft from front wheel hub

- Remove the tool and tighten the bolts securing the brake disc to the wheel hub to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front brake discs	Bolt	M8	0.9 ÷ 1.4

1. Undo the bolts (1a) and remove the right driveshaft (1b) complete with intermediate driveshaft (1c).

Refitting ( Removing

) - Refit the right driveshaft complete with joints and intermediate driveshaft.- Tighten the bolts fixing the right driveshaft to the bearing mounting to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Right-hand bearing-supporting driveshaft	Bolt	M6	0.8 ÷ 1.2	1.4 16v

- Connect the shock absorber to the knuckle and tighten the new bolts to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front shock absorber to wheel strut	Bolt (to be replaced)	M10	6.7 ÷ 7.3	1.4 16v1.9 JTD 8v

- Connect the steering link to the steering strut and secure by tightening the nut to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Steering rod to pillar	Nut	M10	3.6 ÷ 4.4

- Tighten the new nut securing the wheel hub to the recommended torque using the tool used for the removal.

Component	Fastening	dia	Value (daNm)	Validity
Front wheel hub	Nut (to replace)	M24	6.6 ÷ 7.3 + 62° +/- 2°

1. Stake the nut.

Op. 0010T40 CHANGE MANUAL GEARBOX OIL Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 7055B66 ENGINE COMPARTMENT DUST COVER IN RIGHT FRONT WHEEL ARCH - R.R. Op. 4450B04 RIGHT FRONT WHEEL - R.R