198002814 - 5530A10 ALTERNATOR - R+R

Removing ( Refitting )     Op. 1092G10 SINGLE ENGINE BELT - R.R     Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R.1. Undo the nuts (1a) and disconnect the exhaust pipe coupling (1b).
1. Undo the bolt (1a) fixing the gearbox lower reaction rod (1b).
1. Release the protection (1a) for the alternator electrical connections and open it.2. Undo the nuts (2a) and disconnect the electrical connections (2b) and (2c) for the alternator.
DescriptionConnector
2ALTERNATOR    See A010 ALTERNATOR
3. Undo the upper bolt (3a) and the lower bolts (3b) and remove the alternator (3c).To remove upper bolt (3a) it may be easier to work from above the engine compartment.4. Move the power unit slightly fowards and remove the alternator (3c).
Refitting ( Removing ) - Check that the alternator is not damaged.1. Move the power unit slightly fowards and place the alternator in position.2. Secure the alternator tightening the bolts to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
AlternatorBoltM104.5 ÷ 5.5
3. Connect the electrical connections for the alternator and secure them using the nuts.
ComponentFasteningdia  Value (daNm)Validity
Alternator recharging lead Nut M8 0.7 ÷ 1.1
4. Close the protection for the electrical connections.
- Tighten the gearbox lower raction rod nut.
ComponentFasteningdia  Value (daNm)Validity
Gearbox lower reaction rod - bracket side on gearboxBoltM126.8 ÷ 8.2
1. Connect the exhaust pipe coupling (1a), screw in the bolts (1b) and tighten them to the specified torque.
ComponentFasteningdia  Value (daNm)Validity
Flange connecting catalyzer to exhaust pipeNutM82.2 ÷ 2.7
    Op. 4410D17 REINFORCEMENT FOR FRONT SUSPENSION CROSSMEMBER - R.R.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.     Op. 1092G10 SINGLE ENGINE BELT - R.R