1080E28 ENABLEMENT SOLENOID FOR FLOW OF FUEL VAPOUR TO INLET - R+R - Fiat - NUOVA BRAVO - eLearn

198003765 - 1080E28 ENABLEMENT SOLENOID FOR FLOW OF FUEL VAPOUR TO INLET - R+R

) - Position the vehicle on a lift. Op. 1016A10 SOUND-PROOFING COVER - R.R 1. Disconnect the quick-release connectors for the fuel vapour pipes.

1. Disconnect the electrical connection for the fuel vapour solenoid valve.

	Description	Connector
1	Fuel vapour recovery solenoid valve	See L010 FUEL VAPOUR RECOVERY SOLENOID VALVE

2. Disconnect the engine oil vapour supply pipe to the air chamber.3. Unscrew the bolts securing the fuel vapour solenoid valve to the air intake chamber.4. Open the retaining clips, release the one-way valves (4a) and remove the fuel vapour solenoid valve assembly (4b).

Refitting ( Removing

) - Place the fuel vapour solenoid valve assembly in position and tighten the bolts.- Press fit the one-way valves and pipes and tighten the retaining clips.- Connect the engine oil vapour supply pipe to the air chamber.- Connect the electrical connection for the fuel vapour solenoid valve.- Connect the quick-release connectors for the fuel vapour pipes. Op. 1016A10 SOUND-PROOFING COVER - R.R - Remove the vehicle from the lift.