198003777 - 1820B21 MASTER CYLINDER (PUMP) - R R FOR RIGHT HAND DRIVE VERSIONS

Removing ( Refitting ) - Connect a suitable container to the clutch actuator bleed valve and drain all the brake-clutch fluid.1. Disconnect the clutch pump push rod from the pedal.
1. Loosen the band and disconnect the clutch system supply pipe.2. Retract the clip and disconnect the clutch pump supply pipe.3. Undo the nuts (3a) and remove the clutch pump (3b).
Refitting ( Removing ) - Fit the clutch pump in its seat and tighten the nuts to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Clutch master cylinder (pump)NutM81.2 ÷ 1.8
- Connect the supply pipe to the clutch pump using the retaining clip.- Connect the clutch system supply pipe and tighten the band.- Connect the clutch pump push rod to the pedal.    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY     Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR     Op. 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR